Product Information
Applicable product:
Drop-in, integral flange, left drain
K-1114-L
Drop-in, integral flange, right drain
K-1114-R
Fixture*:
Bathing well:
Basin area, bottom
55
″
(139.7 cm) x 23-1/4
″
(59.1 cm)
Basin area, top
64
″
(162.6 cm) x 32
″
(81.3 cm)
Weight
132 lbs (60 kg)
To overflow:
Water depth
15
″
(38.1 cm)
Capacity
78.5 gal (297 L)
* Approximate measurements for comparison only.
Drop-in cut-out dimensions:
70-1/2
″
(179.1 cm) x
40-1/2
″
(102.9 cm)
Pump:
V
Hz
A
1-speed
120
60
7.5
Minimum access panel
pump/control (required):
20
″
(50.8 cm) W x
15
″
(38.1 cm) H
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
41 lbs/square foot (199.6 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
72" (182.9 cm)
42" (106.7 cm)
1-1/2" OD
3/8" (1 cm)
21"
(53.3 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Recommended faucet area
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
3-1/2"
(8.9 cm)
1-1/4"
(3.2 cm)
1-1/4" (3.2 cm)
Pump/Control Access
11-1/16" (28.1 cm)
3-3/4"
(9.5 cm)
19-1/2"
(49.5 cm)
21"
(53.3 cm)
1-1/4"
(3.2 cm)
Tile Flange
Detail
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
1047189-1-C
2
Kohler Co.
