113978-2-
CA
(-)
5
Kohler Co., Kohler WI
Open the supply shut-off valve and check all connections
for leakage. If the connections have been properly
assembled, a slight retightening of the nuts should stop
any leakage.
If the toilet is leaking between the tank and the bowl,
carefully retighten the three brass nuts evenly.
Periodically check all the bowl and tank connections for
leakage for several days following installation.
Fig. #9
FILL FLOAT WITH BALLAST
Hold the float underwater for a few seconds to fill it with
water ballast. Adjust the float by sliding it up or down on
the float rod until the water level is at the marked water
line.
Test flush the toilet.
Check all connections for leakage for several days.
Set the tank cover in place on the tank.
Float
Fig. #10
Float Valve Cap
