Remove rubber
plug
Remote control
Docking station
Fig.#53
Kohler Co. Jan 2018 23 1345889-A02-A
Install Remote Control Docking Station
NOTE: Use suitable mounting methods for the wall construction material. Special fixings may be required for
walls made of plasterboard.
NOTE: Do not install this appliance in positions where it might come in contact with water.
1. Select a proper position for the control docking station to be installed. The position shall be easily operated by
the user when seated on the toilet.
2. Based on the docking station hole positions, drill two 6mm diameter holes, 45mm deep.
3. Insert lag bolt anchors into the holes.
4. Remove the double-sided tape and place docking station over the fixing holes.
5. Fasten docking station with screws and place bushing on the bolts.
Fig.#52
Steps of installation Public anti-loss installation
Lag bolt
anchor
Hook
Lag bolt
Screw
Hook board
Remove rubber
plug
Gasket
