Kohler VEIL K-5402A-0, Homeowner'S Manual, Page: 13 / 20

rear
dryer stop
front flush lighting
Kohler Co. 13 1274372-A05-C May 2018
Click remote UV button to perform UV sterilization function when toilet cover is CLOSED. This process takes about
34 minutes. During UV sterilization process, sterilization will be deactivated if customer opens cover and sits on toilet,
or presses STOP button on side panel.
Press to activate dryer function
Light induction zone
Press night light function down (long beep indication)
Press again to activate night light function (short beep
indication).
Press to enter rear wash
STOP function
Press to flush the toilet
Note:
Note:
UV Sterilization Function
Side Panel Function
UV sterilization function is used to sterilize wand by UV light.
Auto UV sterilization
E-water Function
E-water function is used to sterilize nozzle by E-water.
Toilet shall activate E-water sterilization function after user completes front wash, rear wash or spiral wash etc.
E-water sterilization function with automatically activate every 8 hrs when toilet is not in use.
Auto activates UV sterilization function to sterilize wand if not used for a long time. The process takes about 45
minutes. This function will not be reactivated within the next 24 hrs.
During UV sterilization process, sterilization will be deactivated if customer opens cover and sits on toilet, or
presses STOP button on side panel.
For auto UV sterilization function setting, refer to Page 8.
Manual UV sterilization
Press to enter front wash
1. Each function begins on factory defaults. User can change settings by remote (see remote setting guide, pg7~8).
2. Press STOP during front or rear wash to cease function. This will automatically switch off after 5 minutes.
3. Press STOP during dryer operation to cease function. This will automatically switch off after 4 minutes.