-9-
C. Installation of P-trap
C.
1. Insert drainage pipe with inner diameter
110mm into
drain elbow and weld.
1.
110mm
Water Tank Bracket
Drainage Pipe
2. Tighten the long screw into the holes of the tank bracket
and cover the drainage hole with the big cap, cover the
inlet hole with the small cap.
2.
Long Screw
Inlet Hole
Drainage Hole
Big Cap
Tank Bracket
Small Cap
3. When finishing the brickwork of the wall, take out the big
and small caps, and eliminate unwanted mask with a sharp
knife.
When building the wall, the product cannot be cast
and filled by cement or be squeezed.
Note:
3.
Mask
Big Cap
Small Cap
b) Unplug air hose on flush valve side from air hose
connector and pull it out from the mask.
b)
Note:
This mask assembly needs to be purchased
separately. Part number: 1288193.
1288193
Air Hose
Air Hose Connector
1338609-T01-B
Summary of Contents for VEIL K-20534T-S
Page 26: ... 20 1338609 T01 B ...
