background image

3

113351-2-

AB

Kohler Co., Kohler, WI U.S.A.

Place front cover on unit, aligning lens cover into rectan-
gular lens housing on flush valve. Install four socket head
screws. Do not overtighten screws. Replace water supply
valve cover.

KOHLER

TOUCHLESS

Front Cover

Screws

Summary of Contents for TOUCHLESS K-13686

Page 1: ...Using a screw driver turn the screw clockwise to close valve Activate flush lever to drain water from flush valve assem bly Loosen inlet and outlet nuts and remove manual flush valve assembly Flush Lever Loosen Nuts to Remove Existing Valve Turn Clockwise to Close Valve Cover Water Supply Valve Flush Valve Vacuum Breaker Clean threads on water supply valve Install by inserting flush valve inlet fi...

Page 2: ...nstall as sembly in chassis as shown Battery Holder Assembly Connect Lead to Circuit Board Chassis Install lens cover KOHLER TOUCHLESS Front Cover Rear View Lens Cover Label Using a screwdriver turn screw on water supply valve counterclockwise to open valve Test assembly by covering the lens for 30 seconds minimum Uncover lens Valve should flush after a few seconds Inspect for leakage Turn Counter...

Page 3: ...er WI U S A Place front cover on unit aligning lens cover into rectan gular lens housing on flush valve Install four socket head screws Do not overtighten screws Replace water supply valve cover KOHLER TOUCHLESS Front Cover Screws ...

Page 4: ...L WITHOUT COURTESY FLUSH First 10 minutes from power up check The GREEN LED indicator is on constantly when the urinal sensor detects an object If the urinal sensor detects an object more than 1 minute the GREEN LED flashes until the object is removed The urinal flushes once after the object has been removed BOTH TYPES OF URINALS The Touchless battery urinal flush valve features a low battery indi...

Reviews: