INSTALLATION
5 Waste & Tapware
(a) Fit the tapware. Connect the water supply
to the taps and waste pipe to the waste
outlet.
(b) Run hot and cold water and check for leaks.
When satisfied with the results move on to the
next section.
6 Drawer re-installation
(a) To re-install the drawers, extend the runners
and place the drawer onto the runners.
(b) Gently push the drawer back until you hear
the runners click into place.
50%
7 Sealing
(a) All edges MUST be sealed with an approved
Silicone Sealant.
- Between cabinet and wall
- Between the vanity top and wall
Tap
Supply
Lines
Drain
Assembly
(c) Ensure the drain and faucet assembly is as
shown in Fig. 3.
P Trap
Please visit our website for warranty information:
Kohler NZ
Kohler Australia
www.kohler.co.nz
www.kohler.com.au
INSTALLATION COMPLETE
-5-
Fig. 3
Overflow
