background image

   

                                                                          

1285744-2A-B            

                                                                                                                                        2  

  

   

                                                                          

1285744-2A-B          

                                                                                                                                          3

  

INSTALLATION CHECKOUT

Ensure that all connections tightened. Ensure that the 

handle is in the off position. Turn on the drain and 

main water supply, and check for leaks. Repair as 

needed.

Remove the aerator(8) by coin. Turn on the faucet. 

Run hot and cold water through the spout for about 

one minute to remove any debris. Remove debris from 

the aerator. Shut off the faucet and reinstall the 

aerator.

CLEANING INSTRUCTIONS

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft 

cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely 

affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler faucets and fittings. 

INSTALLATION

Install the mounting stud(2) onto the faucet body 

base(3). 

Slide the washer(4) over the flexible hose(1) and 

mounting stud, and into the groove at the bottom of 

the faucet body.

Insert the faucet assembly into the lavatory hole. 

Position the faucet. From underside of the lavatory, 

place the bracket(5, Rubber washer is on the top) 

onto the mounting stud, and tighten the nut(6) by 

tool(7) to secure the faucet.

Attach the hose to water supply.

2

3

4
1

5

6

74013T-4CD

157

100

89

18°

40 M

ax.

Ø33~Ø36

G1/2˝

430

8

7

Reviews: