1145740-T01-B
-4-
f. Screw on the drain lid.
f.
Fig.8
8
B. Install urinal
B.
1. Install the sprayer and the adapter
1.
a. Insert the sprayer into the hole, with the guide hole in the
middle.
b. Install the gasket and screw the nut tight.
a.
b.
c. Install the adapter and make the inlet at a 90 degree
angle to the left, as shown in Fig. 5.
c.
90
5
Fig.4
4
Fig.5
5
2. Install the drain and the plastic trap
2.
a. Put the washer onto the drain and insert it into the hole.
b. Put the gasket and nut on the bottom.
Do not over screw the nut in this step, because it
is to be screwed tight in the next step after the
pipe is installed.
a.
b.
NOTE:
Fig.6
6
Fig.7
7
c. Connect the hose with the trap.
d. Screw the trap onto the drain and screw tight.
e. Screw tight the nut of the drain mentioned in step.
c.
d.
e.
2
Fig.9
9
3. Install the manual button and magnetic valve
3.
a. Install the magnetic valve.
a.
