8. Install the Strike Side Wall Jamb and Magnet
Push the strike jamb into the appropriate wall jamb with the wide lip facing toward the inside of
the shower. Each slot in the strike jamb will slide over the screw body and fit between the clamp
and wall jamb.
Secure the strike jamb to the wall jamb by tightening the #8-18 x 1/2
″
panhead screws in the
adjustment clamps until snug.
Install a strike jamb cap on the top opening of the strike jamb.
IMPORTANT!
The strike jamb magnet is the longer of the two supplied magnets.
Install the strike jamb magnet to the contact surface of the strike jamb. The grooved side of the
magnet should face in.
Strike Jamb Cap
Strike Jamb
Wall Jamb
Adjustment
Clamp
Groove Side
of Magnet
Strike Jamb
Longest Magnet
Groove Side In
Magnet
Strike Jamb
Sterling
11
1034028-2-F
