1. Measure and Cut the Bottom Track
CAUTION: Risk of personal injury.
Always wear safety glasses when cutting materials.
Measure from wall to wall at the flattest part of the shower ledge (dimension
″
D
″
).
Mark dimension
″
D
″
on the bottom track.
IMPORTANT!
For best results, use a 32 teeth per inch hacksaw blade and a miter box to cut the bottom
track.
Subtract 7/8
″
(2.2 cm) from dimension
″
D
″
and cut the bottom track to this dimension.
File the rough edges smooth where the bottom track was cut, taking care not to mar the finished
surface.
NOTE:
If there are curves where the sidewalls meet the threshold, use a file to contour the bottom track
edges to match the curves.
Measure carefully. If your walls
are curved or angled, measure above the curve or
angle. Failure to do so can result in an improperly cut
bottom track and can void the warranty.
Warning:
Measure
here.
Measure
here.
Measure distance
"D" above curves
in the corners.
Angled
Base
Curved
Base
D
Sterling
5
1053310-2-D
