Thank You For Choosing Sterling
We appreciate your commitment to Sterling value. Please take a few minutes to review
this manual before you start installation. If you encounter any installation or
performance problems, please don’t hesitate to contact us. Our phone numbers are listed
within this manual. Thanks again for choosing Sterling.
Merci d’avoir choisi Sterling
Nous apprécions votre engagement envers la qualité STERLING. Veuillez prendre s’il
vous plaît quelques minutes pour lire ce manuel avant de commencer l’installation. Ne
pas hésiter pas à nous contacter en cas de problème d’installation ou de fonctionnement.
Nos numéros de téléphone sont listés dans ce manuel. Merci encore d’avoir choisi
Sterling.
Gracias por elegir los productos de Sterling
Le agradecemos que haya elegido a Sterling por la calidad que ofrece al mejor precio.
Dedique unos minutos para leer este manual antes de comenzar la instalación. En caso
de problemas de instalación o de funcionamiento, no dude en contactarnos. Este manual
contiene nuestros números de teléfono. Gracias nuevamente por escoger a Sterling.
Important Information
WARNING: Risk of personal injury. Metal surfaces are sharp and can cause
severe cuts. Use gloves and handle the sink edges carefully.
IMPORTANT!
Your sink may appear different than the sink pictured throughout the
installation steps.
NOTE:
More specialized tools may be required to install the sink to countertop
materials other than wood or wood composites.
Due to the nature of undercounter installations, Sterling recommends that
undercounter sink installations be performed by trained and experienced
installers.
For multiple bowl installations, a minimum distance of 2-3/16
″
(5.6 cm) is
required between the bowls. Any required support should be determined by the
countertop supplier.
Some models of undercounter sinks are offered in Reveal (not flush) and
No-Reveal mounting options. The faucet rough-in differs for each model.
The number of mounting brackets included with your sink may differ from the
number of brackets illustrated. Use all the mounting brackets included with the
sink.
For replacement installations, make sure the existing cutout is the same size or
smaller than the cutout for the new sink.
Allow the sealant to cure following the sealant manufacturer’s instructions.
Sterling reserves the right to make revisions in the design of products without
notice, as specified in the Price Book.
Information importante
AVERTISSEMENT: Risque de blessures corporelles. Les surfaces métalliques
ont des bords tranchants et peuvent engendrer de graves coupures. Utiliser des
gants et manipuler les bords de l’évier avec précaution.
IMPORTANT!
L’évier actuel pourrait différer de celui illustré dans les étapes
d’installation.
1071250-2-C
2
Sterling
Summary of Contents for S11449NA
Page 10: ...1071250 2 C Sterling ...
Page 11: ...Sterling 1071250 2 C ...
Page 12: ...1071250 2 C ...
