24
USER MAINTENANCE
If you require a Mira trained service engineer
or agent, refer to section:
‘Customer
Services’
.
Filter Replacement
Exposed Models
1. Isolate the water supplies.
2.
Turn on the flow control knob to relieve water
pressure and to drain any residual water.
3. Unscrew the shower hose or rigid riser from
the mixer outlet.
4. Using a suitably sized wrench loosen both
compression nuts.
5. Using a 2.5 mm hexagonal key (supplied)
unscrew the grubscrews securing the mixer
to the backplate.
6. Remove the mixer.
7. The filters are retained in the elbow inlet,
remove them and inspect for debris blockage.
Clean each of the filters under a jet of water to
remove any lodged particles.
Compression
Nuts
Hexagonal Key
Grub Screw
Filter
Elbow
FAULT DIAGNOSIS
Symptom:
Cause Rectification:
‘User Maintenance’.
Symptom:
Cause Rectification:
Symptom:
Cause Rectification:
Summary of Contents for Mira Miniduo
Page 19: ...19 Mira Minilite EV Mira Minilite Eco EV Mira Moto EV...
Page 21: ...21...
Page 27: ...27...
