3. Install Spout
CAUTION: Risk of product damage.
Use care when installing
the spout assembly to prevent damage to the O-ring seal.
IMPORTANT!
Keep the spout supply tube clean above the finished
deck to avoid damage to the O-ring seal.
Loosen the setscrews in the sleeve.
Using a twisting motion, install the sleeve on the spout supply
tube until it contacts the deck or washer.
Align the sleeve with the setscrews offset from the center (not
facing directly forward or backward) of the supply tube.
Tighten the setscrews.
Place the gasket over the sleeve and against the finished deck.
Position the spout on the sleeve, and carefully press down until
the spout contacts the finished deck.
Align the spout as desired, and tighten the setscrew.
Setscrew
Setscrew
Sleeve
Setscrew
Finished
Deck
Spout
Assembly
Sleeve
Gasket
Kohler Co.
5
1057840-2-A
Summary of Contents for Lyntier K-T10339-4
Page 19: ...1057840 2 A ...
