1. Install AC power unit (sticke
r on the back) dry, and avoid
showering, soaking from water. Customer prepare wire
tube and wire according to requirement. Wire tube
should be put into the wall. Suggested wire: AC connection
wire should with insulated protecting layer or sleeve and
the section should be bigger than 0.5mm . The section of
DC connection wire should be
bigger than 0.3mm . The
connection pattern must according to illustrations above.
2. After wire layout finished, check and repair if needed.
Then connect AC connector of AC/DC transformer to
electrical source from the control box, and DC connector of
AC/DC transformer to faucet. Turn on AC electrical power,
faucet will be in the period of automatic adjusting sensing
distance (about 2 minutes). The faucet will not work during
this period.
直流连接线采用导体标称截面积
mm
的电线。
请严格按照上图进行连接。
0.3
1.
电源盒
(
背面有不干胶
)
应安装在干燥，不会被水
淋湿、浸泡的位置。根据需要客户自备穿线管及
连接线。穿线管安装在墙内。建议交流电源线采用
带绝缘和护套层的电线，导体标称截面积
0.5mm
;
2.
排线完毕后，应检查并确保所有排、接线无误，
再分别连接电源盒
AC
接线端与排线管内交流接线
端，以及电源盒
DC
接线端
(
黑橙线接头
)
与龙头的
电源线接插件（从阀盒内引出的电线），最后打
开
AC
电源，龙头进入
2
分钟自动调距阶段，此
过程龙头不会出水。
2
2
2
2
如何超能动电池系统
(若用户另购
超能动电池
,
具体安装详见其说明书)
Hybrid Energy System
超能动电池系统
Faucet
感应龙头
HOW TO INSTALL THE Hybrid
Energy System
(If using hybrid energy
system as power supply, please refer to
its installation instruction)
台盆顶面
Vessel rim
1205259-2-A
9
用户自备角阀
G1/2
外螺纹
Please user prepare
external thread
check valve G1/2