1356717-T01-
B
-6-
六、安装指南
选择自来水管路上的一个合适的位置来安装净水器。
也要考虑这个位置在更换滤芯时是容易且可操作的。
只连接冷水管道。
测量现有管道的直径，以确定需要什么尺寸的配件或
阀门（不包括在内）。
所需工具及物料（需自备）:
扳手/尺/电钻/防护镜/生胶带;
关闭供水管道水源及打开最近的水龙头以放尽管道内
的压力和余水。
用生料带按照顺时针方向缠绕螺纹连接件5~10圈。将
螺纹连接件拧入滤瓶盖，再用扳手拧牢（切勿过紧，
确保至少一圈螺纹可见。）
遵照滤瓶盖上箭头（FLOW）所指的水流方向（切勿
装反!），将进出水连接件与管道连接。
备注:
需根据安装环境、条件决定具体操作步骤（视实际情
况可能需要更多的连接件！）
推荐在进水和出水处安装阀门以利于维护！
打开进水开关。慢慢将瓶盖上的旁通阀逆时针方向转
动二分之一圈以确保管道冷水进入。然后按下瓶盖上
的红色减压钮释放瓶内空气，打开最近的水龙头冲洗
5分钟。
6. INSTALLATION INSTRUCTIONS
Choose a location on the water line to install the filter.
Select a location that will be easily accessible when
changing filter cartridges.
Connect to cold water line only.
Measure the diameter of the existing pipe to determine
what size fittings and/or valves (not included) will be
required.
You should prepare tools for installation (adjustable
wrench, tape measure, E-drills, safety glasses, plumbers
tape)
Turn-off water supply line and turn on nearest faucet and
drain lines completely.
Apply plumbers tape to fittings and cap and lines, measure
overall length of configured housing cap, hang housing cap
on pipes, make all connections and tighten fittings.
(DO NOT OVERTIGHEN)
Follow the arrow direction (FLOW) of the filter cap (do not
install the reverse), connect the inlet and outlet connector
to the pipe.
Remarks:
The specific operation steps should be decided according
to the installation environment and conditions.
It is recommended to install valves in inlet and outlet to
facilitate maintenance!
Slowly turn on the water supply and turn off bypass, Press
the red pressure-relief button on top of the cap to release
any trapped air, flush for 5 minutes by keeping the nearest
faucet turned on.
Turn off faucet and ensures no leakage.
关闭水龙头后检查，确保无漏水现象。
