background image

Description of Content of Hazardous Substances in Product

Reclaim Indication 
When the product exceeds service life or is unable to use after repair, do not throw the product away in the normal trash.
Please dispose the waste electronic parts through a qualified reclamation enterprise. Make sure the product is handled
properly. Disposing of product must be done in accordance with the local or national government law.

Statistics of Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substance or Elements

Part name

Lead

(Pb)

Mercury 

(Hg)

Cover Assy.

Valve Assy.

×

Control Box Assy.

×

* Battery Box Assy.

* Battery

* AC Power Box

* Water Inlet Assy.

×

Accessories

Polybrominated

biphenyls

PBB

Polybrominated 

Diphenyl Ethers 

PBDE

Cadmium

(Cd)

Hexavalent 

Chromium

(Cr(VI)

×

14

1495647-T2

-A

 

10

*

  :

Indicate only partial product series contains this substance.

Note:

 the information provided is based on the supplier data and Kohler inspection results. The product is designed not to hurt 

the environment. Under current technology, all hazardous materials have been used in the smallest amounts possible. Kohler 
will strive to reduce the use of these hazardous materials used in this product.  

The product “service life for environment protection” is 10 years;   Kohler Company will specify product service 
life based on product characteristics.  The product “service life for environment protection” is only effective when 
the product is used as described in the product specification.  

○:

Indicates that the substance in the material composition is below the high limits of the current requirements in GB/T26572.

:

Indicates that at least one of the homogeneous substance in the material composition is below the high limits of the current

requirements in GB/T 26572.

×

This form is prepared in accordance with SJ / T 11364 .

Summary of Contents for KUMIN K-18655T-NW-CP















Reviews: