5. Installing Other Handle Styles
Cross Handle
Install the sleeve and bonnet to the valve stem.
Align the bonnet and secure to the valve stem with the screw.
Fit the center cap to the bonnet so the holes align.
Insert the long arm into the large holes in the center cap so the
holes align.
Insert the long and short studs into the remaining center cap
holes and securely thread together.
Insert the O-rings, sleeves, washers, and end caps to the handle
ends.
Valve Stem
Short
Stud
Long Stud
O-Ring
(4 Places)
Sleeve
Sleeve
Sleeve
Washer
Washer
Washer
End Cap
End Cap
End Cap
Sleeve
Bonnet
Screw
Center Cap
Long Arm
114498-2-E
8
Kohler Co.
