9. Adjust the Stopper
NOTE:
The stopper may need to be adjusted to maximize water drainage.
Place the stopper and strainer cup into the drain body and open the drain.
Check the gap between the stopper and strainer cup.
Remove the strainer cup and stopper from the drain body.
Thread the adjustment screw out of the stopper until the stopper almost touches strainer cup.
Thread the knurled nut until it touches the stopper.
If necessary, repeat the process until the stopper is properly adjusted.
Strainer Cup
Stopper
Knurled
Nut
Drain
Body
Adjustment
Screw
Cable
(Assembled
to Control)
113776-2-AB
8
Kohler Co.
Summary of Contents for K-8816
Page 23: ...113776 2 AB ...
