1025490-2-
A
Kohler Co.
6
Supply Tube
Coupling Nut
Supply Stop
4. Connect the Supplies
CAUTION: Risk of restricted water flow and product damage
. Use
extreme care when bending the supply tubes to avoid kinking.
CAUTION: Risk of back siphonage.
Do not remove the ground
joints from this faucet. The ground joints contain important
back-siphonage protection.
-
Install the sink following the sink manufacturer’s instructions.
-
Connect the supply tubes to the supply stops. Left is hot - right is
cold. Tighten all connections.
5. Installation Checkout
-
Ensure that all coupling nuts are tight.
-
Ensure that the lever handle is in the down position.
-
Open the drain.
-
Remove the spray head and screen from the end of the hose. Position
the hose in the sink.
-
Turn on the main water supply, and open the valve for one minute to
flush the fitting.
-
Reattach the spray head and screen. Turn on the water and check for
leaks. Repair as needed.
