1025490-2-
A
Kohler Co.
4
Rubber
Washer
Faucet
Body
Escutcheon
Spacer
Hose
O-Ring
2. Install the Escutcheon (optional)
NOTE
:
For installation on marble,
do not
use plumbers putty. Use
the self-adhesive gaskets provided. Remove the paper backing and
apply the gaskets (adhesive side down) over the outside holes.
-
For 1-hole installations:
The escutcheon, spacer, and O-ring are not
required. Slide the rubber washer over the faucet tubing and hose.
-
Insert the faucet tubing and hose into the hole.
-
For 3-hole installations:
Apply a ring of plumbers putty to the
underside of the escutcheon.
-
Insert the O-ring into the groove in the spacer.
-
Slide the rubber washer, escutcheon, and spacer (O-ring side down)
over the faucet tubing and hose.
-
Insert the faucet tubing and hose into the center hole, carefully
aligning the escutcheon. Press down on the escutcheon and remove
any excess putty.
