Possible reasons
Suggestions and measures
1. Toilet not work
2. Toilet not flushing
A.
Water failure
B.
Tee valve for water supply is closed
C.
Power failure
D.
Product is at standby mode
E.
Wash mode is in progress
F.
Auto-flushing is deactivated
3. Toilet is not clean
after flushing
A.
Filter screen is blocked
B.
Water pressure is insufficient
4. Wash mode is
abnormal
5. Flushing mode
stops in the
process of operation
A.
If necessary, press again the Flushing button
B.
Change your sitting posture or be seated again
A.
Remove the foreign matters or dry the seat
A.
If necessary, press again the Dryer button
B.
Change your sitting posture or be seated again
8.
Deodorization fan
not work
A.
The seat is unable to sense human body
B.
Stop button is pressed by mistake during operation
C.
Auto deodorization function is deactivated
Trouble shooting
This guide of trouble shooting is for general help only. Authorised representatives or qualified electricians of Kohler
Company shall be able to solve all electrical failures. If you want to know about the service of warranty, please
contact local dealers or wholesalers.
Troubles
A.
Power failure
B.
Plug not connected or no power to socket
A.
Wait until the power is restored
B.
Insert the plug or detect the power socket
A.
Refer to "Washing of filter screen"
6.The wash mode
7.Dryer fan stops in
operation
F.
Refer to "Guide on setting of remote controller"
D.
Please be seated or adjust sitting posture
E.
Refer to "Washing of filter screen"
F.
Check if the inlet hoses are bent over much. In
that case, adjust the hoses.
G.
Flush again after this flushing in progress
seated
when people are not
the process of
may work even
A.
Water failure
B.
T
ee valve for water supply is closed or not
opened
completely
C.
Product is at standby mode
D.
Not yet seated or current sitting posture unable
to be sensed by the seat
E.
Filter screen is blocked
F.
Water pressure is insufficient
G.
The toilet is in the process of flushing
A.
Flushing mode stops automatically after
continuous flushing for 5 minutes
B.
The seat is unable to sense human body
A.
The seat is covered by foreign matters or the
seat is wet
A.
The dryer fan stops automatically after continuous
usage for 4 minutes
B.
The seat is unable to sense human body
A.
Change your sitting posture or be seated again
B.
If necessary, please leave the seat for 2S and
the sit down again.
C.
Refer to "Guide on setting of remote controller"
C.
The leakage circuit breaker at cable plug is not
reset
D.
Product is at standby mode
C.
Press Reset button on the plug
D.
Press Power button at the side. Wake up the
product
A.
Wait until the water supply is restored
B.
Open the tee valve for water supply
C.
Wait until the power is restored or check
"manual flushing" to have manual flushing or
by use of basin
B.
Check if all tee valves are opened. If not, please
open
C.
Check if the inlet hoses are bent over much.
In that case, adjust the hoses.
A.
Wait until the water supply is restored
B.
Fully open the tee valve for water supply
C.
Press Power button at the side. Wake up the
product
D.
Press Power button at the side. Wake up the
product
E.
Do it after the operation at wash mode is
completed
1243902-KR01-
D
14
Kohler Co.
