-2-
a)
a) Feet clips "clipped in"
b)
b) Feet clips "unclipped"
5)
6)
4
2
7)
2
8)
~3mm
5) Make sure that there will be room to slide the bath
out of the feet clips and that the surrounding walls
will not interfere with the installation. Also check that
the feet clips are oriented in such a way that the
bath can be slid in and out in one direction.
6) Remove the bath from position and attach the feet
clips to the floor using appropriate fixings screw.
Make sure the clips are fixed in the positions
marked in step 4. Use 2 screws to fix the clip on
diagnal position.
7) Adjust the nuts on the adjust feet, the nut should be
2~3mm lower than the top of the clip.
8) Install the bath drain on the bath.
Note:
a) All clips are oriented in
the same direction.
b) Apply silicon to the hole
on the ground, then insert
the anchor.
a)
b)
6
1175503-T01-A
