Kohler K-4107X, Installation Manual

Page: 3 / 20

Kohler Co. 3 1194357-X2-B
Before You Begin (Cont.)
¨
Observe all local plumbing and building codes.
¨
All information in these instructions is base on the latest product information
available at the time of publication. Kohler Co. reserves the right to make
changes at any time without notice.
¨
Do not use an extension cord with the product.
¨
Connect to a cold water supply with a pressure of 0.7-7.4 Bar (0.07-0.74MPa)
¨
Connect only to a cold water supply line carrying direct tap water.
¨
Unplug the seat and drain the seat if functions of the seat will not be operated
for an extended period of time.
Tools and Materials
Adjustable
Wrench
Blade Screw driver
Masonry Drill
Screw driver
CAUTION: Risk of product damage. Do not install this seat in a location
where water might be splashed on the product.
CAUTION: Risk of product damage. Do not install this seat in a location
exposed to excessive moisture where condensation might form on the
product surface. Please ensure sufficient ventilation in your surroundings
to prevent possible damage to electronic components.
CAUTION: Risk of product damage. Pushing or pulling on the water
connection may cause water leakage.
CAUTION: Risk of product damage. Do not apply excessive force to
the spray wands. Product may break.
CAUTION: Risk of product damage. Take care to face right in position
to the thread while connecting seat inlet pipe, otherwise, the inlet pipe
thread may wear off and lead to water leakage.