2. Install the Valve
CAUTION: Risk of product damage.
Do not apply direct heat to
the transfer valve body. Excessive heat will damage the plastic
valve components and the plaster guard.
Install 1/2
″
copper hot and cold water supplies and connect them
to your mixing valve according to the manufacturer’s instructions.
NOTE:
Do not install the transfer valve upside down.
Route the 1/2
″
mixed water supply line to the transfer valve inlet
port location.
Solder the mixed water supply line to the transfer valve inlet
port.
Plaster
Guard
1/2" Mixed
Supply Inlet
Finished
Wall
Kohler Co.
5
088037-2-B
Summary of Contents for K-407
Page 23: ...088037 2 B...
