Tools and Materials
Before You Begin
WARNING: Risk of electrical shock.
Connect to a properly
grounded, grounding-type receptacle, protected by a
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB).
CAUTION: Risk of product damage.
Handle with care. Vitreous
china can break or chip if the bolts and nuts are overtightened, or if
the product is handled carelessly.
IMPORTANT!
Record the model number (from the label on the box)
in the Homeowners Guide for reference.
A dedicated 120 VAC, 15 A, 60 Hz circuit (protected by a Class A
GFCI or ELCB) is required for installation.
NOTICE:
The Canadian Electric Code requires receptacles installed
in bathrooms to be located at least 1 meter from a bathtub or
shower if practical, but in no case less than 500 mm. If the
installation is in Canada, install this unit in accordance with the
Canadian Electrical Code, Part 1.
Observe all local plumbing and building codes.
Carefully inspect the new toilet for damage.
If the existing toilet does not have a supply shut-off valve below
the tank, install one before installing the new toilet.
Kohler reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
10" Adjustable
Wrench
Supply
Shut-Off
Valve
Tape
Measure
Tubing Cutter
Safety
Glasses
Hacksaw
Sponge
Level
• 5/16" T-Bolts w/ Nuts and Washers
• Putty Knife
• Screwdriver
• Electrical Tools and Supplies
• Metal File
Plus:
Wax Seal
1057478-2-B
2
Kohler Co.