Tools and Materials
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
WARNING: Risk of personal injury. Metal surfaces are sharp
and can cause severe cuts. Use gloves and handle sink edges
carefully.
Observe all local plumbing and building codes.
Prior to installation, unpack the new sink and inspect it for
damage. Return the sink to its protective carton until you are
ready to install it.
Inspect the drain and supply tubing. Replace if necessary.
Due to the nature of undercounter installations, Kohler Co.
recommends that undercounter sink installations be performed by
trained and experienced installers.
Install so future removal from underneath the countertop is
possible without damaging the countertop.
For multiple bowl installations, a minimum distance of 2-3/16
″
(5.6 cm) is required between the bowls. Any required support
should be determined by the countertop supplier.
Pencil
Drill
Scissors
Hacksaw
Sealant
Template
(supplied)
Tape
Measure
Safety
Glasses
Plus:
• 1/2" or larger drill bit
• Hole saw 1-3/8"
• Gloves
• Jigsaw
1019948-2-D
2
Kohler Co.