1. Preparation
Install the water supplies and drain piping according to the
roughing-in information.
NOTE:
Provide for sufficient spout overhang into the lavatory basin.
The spout must be at least 8
″
(20.3cm) long for adequate clearance
into the lavatory.
Cut out the template where indicated for countertop opening. Cut
along the inside of the cutting line.
Position the template on the countertop.
Check for adequate clearance between the backsplash and the
outside edge of the lavatory.
Refer to the wall-mount faucet installation instructions for
required clearance, and mark the preferred faucet hole locations
using a soft lead pencil.
Trace the template on the countertop with a pencil.
Backsplash
Cut-out
Line
Outside
Edge of
Lavatory
Kohler Co.
3
1018900-2-A
