1368274-T01-A
-17-
14 REPAIR AND MAINTENANCE
Cut off the power supply before cleaning or maintenance of
the steam oven.
In order to extend the service life of the steam oven, please
note the following:
1. The oven tank surface and attached stainless steel parts should
be cleaned with warm water. Do not clean with strong detergent
or strong corrosive agents. Otherwise the stainless steel will
be spotted. For spots that are difficult to remove, clean with a
special cleaning agent available on the market. The cleaned
parts must be rinsed and dried before they can be used.
2. Pour the cleaning agent onto a wet cloth or wipe the inner surface of
the steam oven, then thoroughly scrub it with clean water, and finally
dry it with a soft cloth or an oil tanned leather. Do not use abrasives,
cleaning agent containing chloric acid (e.g., washing powder),
grinding gauze or acid substance (e.g., alkaline detergent) to clean
dishes. Deposits will appear in the steam oven after using for a long
time. Please use soft gauze to remove. A rubber sealing ring is
arranged around the opening of the steam oven. Please check the
usage of the sealing ring regularly. Clean if necessary, but do not
use abrasive products. If the seal ring is damaged, please contact
the nearest after-sales service center. We recommend that you do
not use the steam oven until the sealing ring is repaired.
3. Cleaning agents for descaling are suitable, such as Durgol
or liquid coffee machine cleaning agents. Foam-containing
cleaning agents are not suitable.
4. Do not use vinegar or products containing vinegar, or it will
damage the internal circuits.
5. Avoid the use of abrasive cleaners, such as washing pads,
steel balls, etc., which may damage the surface.
Important:
please do not put the water tank into the dishwasher
for cleaning.
15 CHANGE THE LIGHT
1. Cut off all power to the steam oven or unplug the power socket.
2. Rotate and remove the bulb cover.
3. Remove the old bulb, and then replace it with a new one.
Voltage: 220 to 240 V
Wattage: 25 W
Model: G9
4. Re-rotate and fix the bulb cover in the original groove to
connect the power supply.
14
㢴⸆腊襒盲絶⥝♸⥂Ⱞ
㖈幡峇䧴⥂Ⱞ㢴⸆腊襒盲銳ⴗ倗歏彂կ
⚹✫䒁㢴⸆腊襒盲涸⢪欽㼑ㄐ霼岤䠑⟄♴Ⳝ挿
1.
拝胐邍ㄤ꣡⟝♶Ꝑꛩ鿈⟝欽庛宐幡峤ⴗ⺡⢪欽䔂⸂峤
嶷䧴䔂臱赤幡峤կやⴭ♶Ꝑꛩ⠔剣俤挿կ㼆✵䖎ꦼꤑ
涸俤挿㖈䋑㖞♳餝✈⚁欽幡峤幡峤կ幡峤た涸鿈⟝䗳곢
Ȿ峤䎁ⲙ亭䎁た倰腊⢪欽կ
2.
㼜幡峤⦝ⵌ♧㗌弪䋒♳䧴亭䭎㢴⸆腊襒盲ⰻ鿈搬た䕸
䏀欽幡宐亭峤剒た欽鲱䋒䧴屘ꭶꬠ亭䎁կⴗ⺡⢪欽熋瀨碫
ゎ守ꃑ䧭ⴔ幡峇⢾㥵 峤邆磋瘝ծ灇熋紳䋒䧴ꃑ䚍暟餘
⢾㥵 焦䚍寓幡峤渹㶩կ㢴⸆腊襒盲⢪欽䖎傞ꢂ
⠔ⴀ梡㛜獤暟霼欽鲱紳䋒幡ꤑկ㖈㢴⸆腊襒盲䒓〡㔋ワ剣
♧堩脸㺙㼓㕕կ霼㹁劍唬叅㺙㼓㕕涸⢪欽䞔ⲃկ㥵剣䗳銳〳
⟄幡峤⡎ⴗ⺡⢪欽灇熋ⵖㅷ幡峤կ㥵卓㺙㼓㕕䰀㗁霼♸
剒鵛涸㈒た剪⸉⚥䗱翫絞կ䧮⟌䒊雳䝠湬荛㺙㼓㕕⥝㥩た倰
〳⢪欽㢴⸆腊襒盲կ
3.
鷓ざꤑ㘻涸幡峤㥵
Durgol
䧴巊⡤ㄳ㉰劼ꤑ㘻幡峤կ♶
鷓ざ欽ゎ岙屁涸幡峤կ
4.
♶銳⢪欽ꃲ䧴ゎꃲ涸❡ㅷ⠔䰀㹲ⰻ鿈歏騟կ
5.
鼙⯝⢪欽熋瀨㘗幡峇㥵峤巄㙈ꛩ⚏椕瘝〳腊⠔䰀㗁
Ⱖ邍կ
ꅾ銳
霼♶銳㼜宐盲佞Ⰶ峤烽劼幡峤կ
15
刿䰃㢴⸆腊襒盲撑僈抧
1.
ⴗ倗㢴⸆腊襒盲䨾剣歏彂䧴僽䬬歏彂䳃䏠կ
2.
偒鲮䎇⽸♴抧岙⥂䫡縟կ
3.
䬬♴傊抧岙搬た䰃♳涸倝抧岙կ
歏⾓
220-240
⠃
檲侨
25
檲
㘗〿
G9
4.
㼜抧岙⥂䫡縟ꅾ倝偒鲮㔿㹁㖈⾲剣涸⳾坵⚥鵶䱹歏彂կ
