-1-
BEFORE YOU BEGIN
©
©
Copyright Kohler China Investment Co., Ltd. 2021
2021
!
!
!
!
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operation and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information -
.
This product complies with GB 4706.1-2005, GB4706.23-
2007, GB 4706.27-2008 and Q31/10106000060C022-
2020.
please leave instructions for the
consumer
!
!
!
!
,
-
GB 4706.1-2005
GB4706.23-2007
GB
4706.27-2008
Q31/10106000060C022-2020
WARNING: Risk of electrical shock.
WARNING: Risk of electrical shock.
WARNING: Risk of electrical shock.
Warning: Danger of electric shock.
Warning: Danger of electric shock.
Warning:
Warning:
Warning:
Warning:
Warning:
A licensed
electrician should make all electrical connections.
Connect only to
a circuit protected by a typical two-pole circuit breaker.
Disconnect
power before servicing.
The appliance
shall be installed according to the national wiring rules.
Otherwise, it may cause electric shock or fire.
This product
must be used under the power supply with leakage
protection switch conforming to CCC (the leakage
current is below 30mA). Otherwise, it may cause
electric shock and fire.
When installing the product, A power full
pole switch with a contact opening distance of not less
than 3mm must be installed in its power supply line (It
needs to be purchased separately by the user, and its
rated load capacity is not less than 250V ~, 16A) To
connect or disconnect the host power supply.
The power full pole switch must be cut off before
installation, Cleaning, maintenance and repair.
*Special note: When multiple products need to be
installed at the same time, Each product needs to be
separately installed with a power full pole switch.
After the installation of the product, the
distance between the bottom of the product and the
ground must be greater than 2.3m.
The installation of the product should make
the switch and other controllers inaccessible to people
in the bathtub or shower area.
It is forbidden to use the power beyond the
rated voltage of 220 V~, 50 Hz. Otherwise, it will
damage the product and cause fire.
In order to avoid the danger caused by the
false reset of the thermal circuit breaker, the appliance
can not be powered by external switching devices,
such as timers or connected to the circuit which is
regularly on and off by common components.
CCC
30mA
3mm
250V~, 16A
*
2.3m
220V
50Hz
1369766-T01-E
