Included Components/Recommended Tools
Before You Begin
CAUTION: Risk of property damage:
Do not use lithium
ion batteries with this product. Exposing lithium ion batteries
to water can result in a fire.
NOTICE: Risk of property damage.
If the toilet is plugged, turn off
the water supply before attempting to unplug it. The sensor can be
inadvertently activated while unplugging the toilet, resulting in an
overflow.
NOTICE: Risk of product damage.
Use of in-tank toilet cleaners
will damage this product. In-tank cleaners emit gases which will
damage the seals and corrode the interior components. Damage due
to use of in-tank cleaners voids the warranty.
IMPORTANT!
This product is designed to work as a retrofit on
existing toilets, but will not work with all models or variations. The
steps required to install the touchless module to some models of
toilets may differ from those shown.
IMPORTANT!
If you experience difficulty installing this product on
your style of toilet, review the compatibility list and installation
videos at KOHLER.com/TouchlessToilet.
NOTE:
Most toilets can be configured as touchless flush only
(recommended) or both handle flush and touchless flush. A hole
cover is provided for touchless only configuration.
5
1
2
3
4
6
Pads
(To remove the trip lever)
(To trim the chain)
Recommended Tools
Provided Components
Chain
and
Clips
Emblem
Bracket
Module
Hole Cover
Nut
Vent Bridge
(4) AA
Batteries
Battery Holder
1216369-2-D
2
Kohler Co.