7. Install the Batteries
CAUTION: Risk of property damage:
Do not use lithium
ion batteries with this product. Exposing lithium ion batteries
to water can result in a fire.
NOTE:
When the batteries are low, the unit will beep five times at
half second intervals when activated. Replace the batteries when this
happens.
Install the batteries in the battery holder. Orient them as shown in
the diagram on the battery holder.
Open the module lid.
Install the battery holder with the open side facing the back of
the module and press down until it stops.
Confirm the top edge of the battery holder is below the rim of the
module.
Close the module lid and press on the front ledge until the clasp
engages.
Position
as shown.
Battery Holder
Rim
Press.
1216369-2-D
14
Kohler Co.