1. Faucet Installation
Apply plumbers putty or other sealant to the underside of the
faucet according to the manufacturer’s instructions.
Center and align the faucet on the sink.
Securely hand tighten the nuts from underneath the sink.
Remove any excess putty or sealant.
2. Supply Installation
NOTE:
If the supply tubes need to be cut, allow for required
penetration of the tube into the supply stop.
NOTE:
If the sink is not installed, install it at this time. Be sure to
follow all instructions packed with the sink.
Slip the nuts onto the supply tubes.
Position the round end of the supply tube squarely to the inlet of
the faucet shank and supply stop.
Tighten the nuts.
Faucet
Sink
Nut
Apply
plumbers
putty.
Supply
Tube
Supply Stop
Nut
Faucet Shank
Kohler Co.
3
106039-2-AB
