1. Install the Supply and Stop
Apply thread sealant to the male threads of the short pipe, long
pipe, and right-angle stop.
Secure them to the control fitting as shown.
Thread the ground-joint elbow onto the long pipe, and tighten
securely.
Install the riser tube to the spout, and tighten securely.
Install the control fitting to the supply stops.
Carefully bend the riser tube to fit onto the ground-joint elbow,
and tighten securely.
Open the water supplies to the control fitting. Use the volume
control key (provided) to open the right-angle stop. Run water
through the spout for one minute, moving the control fitting
through its full range of operation.
Check for leaks and repair as needed.
Riser
Assembly
Control
Fitting
Supply Stop
Ground-Joint
Elbow
To
Spout
Riser
Tube
Right-Angle Stop
Volume Control Key
To
Spout
Volume
Control
Key
Kohler Co.
3
105333-2-AB
