Product Information
Applicable product:
Drop-in rim style
K-1224P
Integral flange, left drain
K-1224P-L
Integral flange, right drain
K-1224P-R
Fixture*:
Bathing well:
Basin area, bottom
48
″
(121.9 cm) x 24
″
(61 cm)
Basin area, top
59
″
(149.9 cm) x 30
″
(76.2 cm)
Weight
110 lbs (49.9 kg)
To overflow:
Water depth
14
″
(35.6 cm)
Capacity
67 gal (253.6 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
64
″
(162.6 cm) x 34
″
(86.4 cm)
V
Hz
A
Pump: 1-speed
120
60
7.5
Minimum access panel
pump/control (required):
20
″
(50.8 cm) W x
15
″
(38.1 cm) H
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
42 lbs/square foot (206 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to CSA B45 and ANSI Standard Z124.1.2. All
dimensions are nominal.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Recommended Faucet Area
Pump/Control Access
(If Apron Is Not Used)
20" (50.8 cm) W x
15" (38.1 cm) H
18-1/2"
(47 cm)
20"
(50.8 cm)
8-11/16" (22.1 cm)
1-11/16"
(4.3 cm)
3"
(7.6 cm)
2-7/8"
(7.3 cm)
1" (2.5 cm)
35-7/8" (91.1 cm)
3-1/2"
(8.9 cm)
18"
(45.7 cm)
66" (167.6 cm)
1-1/2" OD
1-1/4"
(3.2 cm)
1/2" (1.3 cm)
R. Max
Integral
Flange Detail
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
K-1224-*
1014719-1-B
2
Kohler Co.
