Kohler K-12171, Installation Manual

Page: 5 / 44

3. Supply Installation
NOTE: If the sink is not installed, install it at this time. Be sure to
follow all instructions packed with the sink.
Connect the supply hoses to the supply stops. Left is hot, right is
cold.
Tighten all connections.
4. Checkout Installation
Remove the aerator from the end of the spout by turning it
counterclockwise.
Turn on the main water supply.
Open the faucet handle to the ON position.
Flush hot then cold water through the faucet for about one
minute.
Push the faucet handle down to the OFF position.
Reattach the aerator by turning it clockwise.
Supply Stop
Supply Hoses Aerator
Spout
Kohler Co. 5 1004617-2-E