1. Spout Installation
Assemble the washer onto the spout base.
Thread the channel and hex nut onto the stud. Secure the faucet
to the lavatory by tightening the hex nut with an adjustable or
open end wrench.
Do not overtighten.
2. Valve Body Installation
Turn the locknuts down onto each valve body.
Insert the valve bodies from underneath fixture so the valve
outlets face the spout.
Apply a bead of plumbers putty to the underside of the flanges
according to the manufacturer’s instructions.
Hand tighten the flanges.
Attach the hoses to the valve outlets and wrench tighten.
Tighten the locknuts.
Lavatory
Channel
Hex Nut
Stud
Tee
Spout
Washer
Lavatory
Tee
Stud
Apply
plumbers
putty.
Valve Inlet
Valve Body
Locknut
Flange
Hose
Valve Outlet
Kohler Co.
3
114369-2-BB
