Product Information
Applicable product:
Drop-in rim style, custom pump, heater
K-1162-S1HB
Fixture*:
Bathing well:
Basin area, bottom
43
″
(1092 mm) x 21-9/16
″
(548 mm)
Basin area, top
53-1/2
″
(1359 mm) x 32-1/8
″
(816 mm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15” (381 mm)
Capacity
57 gal (215.9 L)
* Approximate measurements for comparison only.
V
Hz
A
Pump: 1-speed
120
60
7.5
Heater: 1.5 kW
120
60
12.5
Minimum access panel
pump/control (required):
20
″
(508 mm) W x
15
″
(381 mm) H
Included components:
Cut-out template
1042556-7
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Heater
120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24
″
(610
mm) of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
35 lbs/square foot (171 kg/square meter) loading.
The pump must be relocated to the custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to CSA B45.5/IAPMO Z124. All dimensions
are nominal.
Drop-In Rim Detail
2-7/8"
(73 mm)
3" (76 mm)
Pump/Control Access
Recommended faucet area
9" (229 mm)
Max
21"
(533 mm)
3-1/8"
(79 mm)
3-1/2"
(89 mm)
20"
(508 mm)
18-1/2"
(470 mm)
1-1/2"
(38 mm)
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Ø 1-1/2"
10-13/16"
(275 mm)
60" (1524 mm)
42" (1067 mm)
3/8" (10 mm)
1191346-1-A
2
Kohler Co.
