Product Information
Applicable product:
Drop-in rim style, custom pump
K-1162-S1CB
Fixture*:
Bathing well:
Basin area, bottom
43
″
(1092 mm) x 21-9/16
″
(548 mm)
Basin area, top
53-1/2
″
(1359 mm) x 32-1/8
″
(816 mm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15” (381 mm)
Capacity
57 gal (215.9 L)
* Approximate measurements for comparison only.
Pump: 1-speed
120 V
60 Hz
7.5 A
Minimum access panel
pump/control (required):
20
″
(508 mm) W x
15
″
(381 mm) H
Included components:
Cut-out template
1042556-7
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24
″
(610
mm) of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
35 lbs/square foot (171 kg/square meter) loading.
The suction line extends 1/8
″
(3 mm) beyond the edge of the rim.
The pump base extends 9
″
(229 mm) beyond the edge of the rim.
Modify the framing as needed.
The pump must be relocated to the custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to CSA B45.5/IAPMO Z124. All dimensions
are nominal.
Drop-In Rim Detail
2-7/8"
(73 mm)
3" (76 mm)
Pump/Control Access
Recommended faucet area
9" (229 mm)
Max
21"
(533 mm)
3-1/8"
(79 mm)
3-1/2"
(89 mm)
20"
(508 mm)
18-1/2"
(470 mm)
1-1/2"
(38 mm)
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Ø 1-1/2"
10-13/16"
(275 mm)
60" (1524 mm)
42" (1067 mm)
3/8" (10 mm)
1191345-1-A
2
Kohler Co.
