Your Kohler Whirlpool
The whirlpool is equipped with the following components:
•
Bath -
The bath acts as a reservoir for water and provides a location for the hydro-massage action.
•
User Keypads (2) -
Located within easy reach, the keypads allow you to turn the whirlpool on and
off, access all the whirlpool modes, and regulate the water flow or pulse speed. Available modes
will be illuminated in blue. Active modes will be illuminated in green.
•
Pump Motors (2) -
The pump motors provide quiet, variable speed power to circulate the water and
create the soothing hydro-massage action.
•
Adjustable Jets -
The adjustable jets may be positioned to optimize their hydro-massage effect. The
trim on the adjustable jets allow you to adjust the air and water flow.
•
Heaters (2) -
The heaters are designed to automatically help maintain the temperature of the water
up to 104°F (40°C) to enhance your hydro-massage experience. The heaters turn on automatically
when the whirlpool is operating and turn off when the pump motors are turned off. The heaters
may be turned off through the keypad at any time while the pump motors are operating.
•
Pillows -
The pillows provide a comfortable place to rest your head as you relax.
•
Remote Controls (2) -
The waterproof remote controls bring all the whirlpool features to your
fingertips.
•
Chromatherapy -
Add ambience to your bath with lights that automatically and continuously cycle
through the eight colors, or select just one color: white, violet, indigo blue, aqua blue, green, yellow,
orange, and red. One cycle through all eight colors takes approximately one minute. This mode may
be used with all modes of operation and also when the pumps are not operating.
•
LED Lights (3) -
The LED lights illuminate the ledge separating the two bath spaces.
•
Effervescence Ports -
The effervescence ports are intended to be a relaxing, soothing experience. The
Flexjets and backjets will automatically turn off when the effervescence mode is activated.
•
Backjets -
This mode delivers massaging water to your back. The backjets pulse from the bottom to
the top of the whirlpool. Water flow and pulse action occur from two backjets at a time.
The user keypad (2 provided) allows
you to turn the whirlpool and heater on
and off and regulate the water flow.
Adjustable jets allow you to
adjust the air and water
flow and direction.
The bath provides a reservoir
for the hydro-massage action.
Backjets
The pump motor (2 provided)
provides quiet, variable speed
power to circulate the water.
The heater (2 provided)
helps maintain the water
temperature up to 104˚F
(40˚C).
NOTE:
Bath shown for illustrative
purposes. Your bath
model may vary.
1042760-5-D
4
Kohler Co.
