Kohler K-1006, Installation Manual

Page: 2 / 20

Important Information
WARNING: When using electrical products, basic precautions should always be followed,
including the following:
DANGER: Risk of electric shock. Connect only to a circuit protected by a Ground-Fault
Circuit-Interrupter (GFCI).
Building materials and wiring should be routed away from the pump body and other heat-producing
components of the unit.
Install to permit access for servicing.
Grounding is required. The unit should be installed by a qualified service representative and grounded.
WARNING: Risk of electric shock. A licensed electrician should make all electrical connections.
WARNING: Risk of electric shock. Disconnect power before servicing.
WARNING: Risk of injury or property damage. Please read all instructions thoroughly before
beginning installation, including the following requirements.
NOTICE: Follow all local plumbing and electrical codes.
Product Information
Electrical Requirements
The installation must have a Class A Ground-Fault Circuit-Interrupter (GFCI). The GFCI protects against
line-to-ground shock hazard. Use a 120 V, 15 A, 60 Hz dedicated service for the footbath.
NOTE:
If the pump supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
Product Notices
WARNING: Unauthorized modification may cause unsafe operation and poor performance of the
footbath.
Do not relocate the footbath pump, or make other modifications to the footbath system, as
this could adversely affect the performance and safe operation of the footbath. Kohler Co. shall not
be liable under its warranty or otherwise for personal injury or damage caused by any such
unauthorized modification.
Factory-Assembled Features
Pump with power supply cord is factory installed. No installation is needed.
The pump and piping are factory-assembled.
Connections and Service Access
Before installation, ensure proper access to the final pump and faucet connections.
1063564-2-D 2 Kohler Co.