-7-
2. Tighten the long screw into the holes of the tank bracket
and cover the drainage hole with the big cap, cover the
inlet hole with the small cap.
2.
Inlet Hole
Drainage Hole
Big Cap
Tank Bracket
Small Cap
Long Screw
3. Connect tap water braided tube on the top of water tank for
water supply as shown.
Note: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
3.
1.
2.
Water Pipe
Connecting Pipe
Mask
Screw
Water Tank
Protective Cover
4. Install rectangle cover
1) Install the rectangular shield in the block screen of the
tank, and tighten the screw to fix mask to the tank.
4.
1)
C. Installation of P-trap
C.
1. Insert drainage pipe with inner diameter
110mm into
drain elbow and weld.
1.
110mm
Water Tank Bracket
Drainage Pipe
1263048-T01-C
Summary of Contents for HYDRO-TOWER 300
Page 18: ...18 A B A B 1263048 T01 C...
