Block Screen
Rectangular Shield
Screw
挡盖
方型罩
螺丝
WARNING:
Do not allow the knife enter the box deeper
than 15mm, otherwise it may damage the
electric wire inside.
1) Cut the cover with a knife as shown.
Low-voltage AC input
connector in tank
低压
AC
电源连接线
(
水箱内
)
low-voltage AC
变压器低压输出端
Brushing Pipe
电工套管
ceiling
天花板
Connect AC 220V
接
AC 220V
Input AC 220V
输入
AC 220V
Output AC 6V
输出
AC 6V
Transformer Assy.
变压器组件
警告：请勿接错变压器的输入输出接线端，否则可能损
坏产品。
WARNING: Don’t mistake the input connector and output
connector, or product may be damaged.
6.
将变压器固定在墙上的合适位置，按照如图所示走线，
将变压器的低压输出端（棕线）穿过电工套管（建议电工
套管管径φ
16
～φ
20
）与水箱内的低压
AC
输入端相连，
接好后将线头连接处拉至水箱内的顶部，不能沉入水中，
电工套管如图示固定后，变压器的高压输入端（黑线）
接
AC220V
交流电。
B. Installation of Rectangular Shield
Knife
Cover
保护面板
美工刀
2) Install the rectangular shield in the block screen of the tank,
and tighten the screw to fix the rectangular shield to the
tank.
2)
1)
B.
方形罩的安装方法
警告：
美工刀伸入箱体内的长度不能超过
15mm,
否则可能
如图用美工刀剪开保护面板。
6. Fix the transformer onto the wall, as illustrated,
connect the output connector of transformer (brown)
with the low-voltage AC input connector in tank, and
put the connector outside the tank. Connect the input
connector of transformer (black) with power supply
220V AC. Customer can use the PVC pipe for wiring.
1104563-T01-C
-5-
