Kohler GM87026-KP1-WHT, Installation Instructions Manual, Page: 4 / 8

4 TT-1622 9/16
5. Restore the generator set to service.
5.1 Check that the generator set is OFF.
5.2 Reconnect the generator set engine starting
battery, negative (--) lead last.
5.3 Reconnect power to the battery charger, if
equipped.
6. Program the low oil level shutdown.
6.1 Check the dipstick to verify the oil level as full.
With the engine running and warm, adjust the high
and low oil level indicators to approx. 12.7 mm
(0.50 in.) from the full level. See Figure 2 for
adjustment locations.
6.2 Using SiteTech
t
, under the Programmable
Digital Input 110 parameter, change the settings
to the following:
Digital Input Enabled: On
Digital Input Logic: Active Close
Digital Input Event: Engine Oil Level
Low Shutdown*
Digital Input Delay: 5 s
Digital Input Inhibit Delay: 30 s
* Engine Oil Level Low Shutdown will be displayed for either low or
high oil level.
Note: For more information on SiteTech
t
, see
TP-6701
t
SiteTech Software Operation
Manual.
Figure 3 Programmable Digital Input 110 Parameter
(in SiteTech
t
)
Parts List
Oil Level Indicator Kits
Kits: GM87026-KP1-WHT and GM87026-KP1-G49
Qty. Description Common Parts
1 Gauge, oil level 227257
4 Mount, controller 241769
1 Cover, plate
for Kit GM87026-KP1-WHT
for Kit GM87026-KP1-G49
GM47418-WHT
GM47418-G49
1 Bracket,
for Kit GM87026-KP1-WHT
for Kit GM87026-KP1-G49
GM86335-WHT
GM86335-G49
2 Nut, hex (10 mm) M6923-10-80
2 Screw, hex cap M933-10025-60
1 Cross, pipe (1/2 in. NPT) X-207-7
1 Pipe (1/2 in. NPT x 1.19 in.) X-209-2
4 Washer, lock
(0.262 in. ID x 0.743 in. OD)
X-22-12
1 Hose (0.25 in. ID x 17 in.) X-386-74
1 Hose (0.50 in. ID x 9.25 in.) X-422-18
2 Clamp, hose (0.69/1.25 in.) X-426-12
2 Clamp, hose (0.25/0.70 in.) X-426-9
1 Coupling X-567-1
1 Connector, hose X-582-38
2 Connector, hose X-582-5
4 Nut X-6210-2
1 Plug, pipe X-75-3
1 Restrictor plug GM98574