Kohler GM87026-KP1-WHT, Installation Instructions Manual, Page: 3 / 8

TT-1622 9/16 3
GM87026-
1. Cut copper tubing at a slight angle at the beginning of the arc.
2. See Oil Level Alarm Mounting View.
3. Coupling (X-567-1)
4. Screws (M933-10025-60 qty. 2) and nuts (M6923-10-80 qty. 2)
5. Mounts (241769 qty. 4)
6. Oil level gauge (227257). Assemble to the upper set of holes
as shown.
7. High level indicator adjust
8. Low level indicator adjust
9. Washers (X-22-12 qty. 4) and nuts (X-6210-2 qty. 4)
10. Oil level bracket (GM86335-WHT or GM86335-G49)
11. Hose (X-422-18) and hose clamps (X-426-12 qty. 2)
12. Hose connector (X-582-5)
13. Pipe (X-209-2). Attach to oil pan on engine.
14. Pipe plug (X-75-3)
15. Pipe cross (X-207-7)
16. Position existing oil drain valve in this position.
17. Restrictor plug (GM98574)
18. Hose connector (X-582-5)
19. Hose (X-386-74) and hose clamps (X-426-9 qty. 2)
20. Cover plate (GM47418-WHT or GM47418-G49). Remove
and discard the existing plate and use existing hardware.
21. Hose connector (X-582-38)
4
3
2
1
11
12
5
6
10
9 8
7
13
14
15
16
18
19
20
21
Oil Level Alarm
Mounting View
17
Figure 2 Installed Kit