TT-1618 6/14
7
Setup Procedure
A laptop computer with access to the Internet is required
to set up the wireless access point. Once setup is
complete, the computer is no longer needed.
Note:
The screen shots shown in this document were
created using Windows
r
7.
Screens and
instructions may vary for different computer
operating systems.
4.
Connect the wireless access point to the
computer.
4.1
Check that the power and network cables are
connected to the wireless access point and PoE
box as described in step 3.
4.2
Use a customer-provided network cable to
attach a laptop computer to the LAN port on on
the PoE Box. See Figure 2.
5.
Change the IP address of your
Windows
r
PC to connect to the device.
Note:
For Mac
r
computers, go to step 6.
5.1
Click on the the Windows start menu icon in the
lower left corner of your screen. See Figure 8.
5.2
Type “network connections” into the
Search
programs and files
box.
5.3
Press Enter or click on View network
connections.
5.4
Click on Local Area Connection.
Figure 8
Selecting the Local Area Network
Connection
5.5
Select Internet Protocol Version 4.
See
Figure 9.
5.6
Click Properties.
Figure 9
Selecting Internet Protocol Version 4
5.7
Click on Use the following IP address. See
Figure 10.
5.8
Change the IP address to 192.168.1.5 and
Subnet mask to 255.255.255.0.
5.9
Click OK.
5.10
Go to step 7.
Figure 10
Entering the IP Address and Subnet Mask
Windows and Internet Explorer are a registered trademarks of Microsoft Corporation in the United States and/or other countries.
Apple, the Apple logo, and Mac are registered trademarks of Apple Inc., registered in the U.S. and other countries.
