TO INSTALL TOILET
Set the toilet upside down on some
padding. Firmly press the toilet gasket
onto the toilet outlet.
Wax ring type toilet gasket
should not be installed at temperatures
less than 21
.
if you are using a toilet
gasket with an integral plastic sleeve,
make sure the gasket is positioned
with the sleeve facing away from the
toilet.
If you temporarily plugged the closet
flange with a rag, remove the rag at
this time and ensure that the drain pipe
is clear and free of debris.
Carefully align and lower the toilet over
the closet flange and T-bolts. Apply full
body weight to the toilet rim to set the
seal.
Do not lift or rock the
toilet after placement - a new
toilet gasket must be installed if
you break the watertight seal.
NOTE 1:
NOTE 2:
CAUTION: Risk of concealed
leakage.
1
21
2
Fig.#5
5
Toilet Outlet (OUTLET)
Toilet Gasket
Fig.#6
6
Assemble the bolt cap bases, washer,
and nuts on the exposed T-bolts.
Handtighten the nuts, then tighten
them an additional 1/2-turn.
overtightening may cause
breakage or chipping of the
vitreous china.
If the T-bolts extend more than 6mm
(1/4") over the top of the nuts, cut off
the excess and file the end. Wipe
away any residue. Install the bolt caps.
CAUTION: Risk of personal
injury or product damage.
T
T
6mm
*Supplied with toilet
*
T-Bolt
T
Bolt Cap*
*
Nut
Washer
Bolt Cap Base*
*
Supply Shank*
*
Supply Shut-Off Valve
Fig.#7
7
*
(
)
(
)
TO CONNECT WATER
SUPPLY
* Flexible hose (not provided) are
recommended to connect the supply
line to the fill valve. If you use a rigid
connection(not provided), take care
not to apply side forces to the bottom
of the fill valve. Be sure the rigid
connection must be fit with supply line
completely to prevent damage shank
by forced connection.
-4-
1176009-T01-A
