background image

   

                                                                          

1230977-2A-B            

                                                                                                                                        2   

  

   

                                                                          

1230977-2A-B            

                                                                                                                                        3  

  

INSTALLATION CHECKOUT

CLEANING INSTRUCTIONS

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft 

cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely 

affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler faucets and fittings. 

INSTALLATION

How To Install The Faucet

Place the escutcheon(1) onto the bottom of the body assembly(2). Slide 

the o-ring(3) into the groove of the escutcheon(1). Put the hoses and 

shank(4) into the mounting hole of the sink. Let the bottom of the 

escutcheon against the deck.

Screw two screws(7) into the threaded ring(8). From underside of the 

sink, place the washer(5), the metal washer(6) and threaded ring with two 

screws onto the shank. Position the faucet so that the hose(9) is toward 

the back and two hoses(10) are symmetrical. Tighten two screws to 

secure faucet to sink.

Attach the hoses to water supplies. When facing the front of the faucet, 

the left hose is hot water, the right is cold water.

Put the weight(11) and clip(13) onto the hose assembly(12). Adjust the 

weight so that the distance is right from the bottom of the faucet to the 

weight. Insert the hose assembly(12) into the hose(9).

Ensure that all coupling nuts are tight. Ensure that the lever handle is in 

the off position. Turn on the main water supply and drain, and check for 

leaks. Repair as needed.

Remove the aerator(14) and the spray(15). Run hot and cold water about 

one minute to remove any debris. Remove any debris from the aerator 

and the filter washer of the spray. Shut off the faucet. Reinstall the 

aerator and the spray.

How To Use Spray

Open the handle, if you want to use the spray by hand, take the spray 

and pull out the hose.

Press the button(A), (B) as shown for two different forms of water flow, as 

figure(a), (b) shown. 

NOTE: 

Please pull it gently and do not draw out the spray hose too long, 

or you may damage the hose and connector.

A

B

a

b

14

15

3

2

8

10

7

9

4

5

1

6

12

13
11

"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953

Reviews: