Rail
Seal
Inside view
B
Wedge
1930
1930
1930
(a) Make sure there are seals in each end
of the top and bottom rails and that they
align with the end of the rails.
(d) Press fit the top rail to the top end of
both glass panels. NOTE: Make sure
that the glass panels align with
the end of the rails.
(e) Use a tape measure to make sure that
the rails are correctly fitted to the glass
panels. The total height of the
assembled product is 1930mm.
If higher, try pressing the top rail onto
the glass panels harder. If lower, insert
a wedge into the gap between the glass
panels and the top rail seal.
(b) Press fit the bottom rail into the wall
retainer on the tray/base.
(c) Press fit the return glass into the bottom
rail. NOTE: Make sure that the fixing
holes in the glass align with the holes
in the bottom rail.
Page 5
INSTALLATION INSTRUCTIONS
ENGLEFIELD
2.2 Return Glass
B
B
Round Sliding
EXCLUSIVE SERIES