Kohler EIR, Homeowner'S Manual

Page: 16 / 48

2 .
*
Sterilized water (refers to refers to the tap water containing hypochlorite generated by chlorine ions after ionization): Sterilized water generated during electrolysis working cycle eliminates
bacteria on the nozzle surface. The antibacterial rate is more than 96%. (Perform test in accordance with GB /T 23131 when the content of chlorine ions in tap water is >24ppm. Different
water quality might cause different sterilization effect. Electrolysis working cycle activation method refers to operation description. Testing lab: China household electrical appliances
testing institute.).
When unseated, press “One button sterilization” button on remote to activate UV sterilization function
(details are shown in the diagram of remote control).
During sterilization process, if customer open cover and start use toilet, or presses STOP button on remote,
UV sterilization function will be deactivated.
3. Manual UV sterilization
Sterilized water*
Automatic energy saving function
Inlet water filtration
Deodorizer
When energy saving set to ON status, product shall auto detect the idle hours and decrease the heating
temperature to reach of energy saving purpose.
For details of automatic energy saving, refer to page
9 .
1.
2.
4.
1. Product default factory setting is auto activate deodorizer function when detecting customer seated.
2. Refer to Remote Setting for how to switch over auto deodorization function.
When filter almost expires, orange LED keeps ON (as shown).
When filter has expired and require replacement, orange light blinks.
Orange and while LED blinks alternately indicate improper filter installation.
For filter exchange refer to page 18 .
Purified water used for rear wash/spiral wash/front wash.
1.
2.
3.
* UV sterilization (refers to the ultraviolet sterilization generated by UV lamp): During UV working cycle, the bacteria on nozzle surface will be eliminated by irradiation. The antibacterial
rate is more than 99%. (Measured after one UV working cycle, it was measured within 18mm×8mm irradiation area. Perform test in accordance with GB /T 23131 requirements, UV
radiation zone was shown in the diagram, UV working cycle activation mode refers to users guide. Testing lab: China household electrical appliances testing institute.)
UV sterilization function*
1.UV function is used to sterilize the nozzle by UV.
2. Auto UV sterilization
When toilet is not in use for a long time, auto UV sterilization function will be activated and start sterilizing
nozzle. No sterilization function shall be activated after this process in another 24hrs.
During
UV sterilization process, if customer open cover and start use toilet, or presses STOP button on
remote, UV sterilization function will be deactivated.
Auto UV sterilization function setting refer
s to Page 9 .
1413624-T01-B 16 Kohler Co.